PFChrom v5 Documentation Contents AIST Software Home AIST Software Support
All graphs within PFChrom use a common interface. Each graph contains its own tool bar and status bar. All graph options are accessed from the tool bar.
Prints the current graph to an output device.
Copies the current graph or its numeric information to the clipboard.
Saves the current graph to file.
Streams a graph and numeric summary to MS Word, or writes an RTF (rich text format) file.
For multiple graphs, the Toggle Display of Selected Graphs toggles the display between all graphs and only selected graphs.
For multiple graphs, the Select All Graphs marks each graph as selected.
For multiple graphs, the Unselect All Graphs marks each graph as unselected.
For multiple graphs, the Zoom-In Applies to All Graphs enables the zoom to apply to all graphs controlled by the toolbar. Both the x-range and y-range of the zoomed graph are transferred to all other graphs.
For multiple graphs, the Zoom-In Applies to All Graphs, X-scaling only enables the zoom to apply to all graphs controlled by the toolbar, but only the x-range will be transferred to the other graphs.
For graphs with a 2D contour available, the Display as 2D Contour selects this format.
For graphs with a 3D gradient surface available, the Display as 3D Gradient Surface selects this 3D format.
For graphs with a 3D shaded surface available, the Display as 3D Shaded Surface selects this 3D format.
For graphs with a 2D plot available alongside 3D options, the Display as a Single 2D Plot selects this standard 2D graph format.
The Manual Sectioning Mode activates the mode where points are enabled by sliding left and disabled by sliding right when the left mouse button is held down.
The X-Range Sectioning Mode activates the mode where points are enabled within a rectangular XY zone framed by the mouse. Only the X-values of the rectangle are used in the sectioning.
The Zoom-In Mode actives the mode where the mouse is used for zooming-in a rectangular XY zone framed by the mouse. This button does not appear when zoom-in is the only available mode.
The Change Position Mode button activates the mode where data sets can be graphically rearranged in the order or sequence you wish.
The Show Graph Hints manages the XY hints in graphs. For multiple graphs, the first click on this button activates the hints on the current graph. A second click will synch the hints across all graphs at the specific x value at the cursor. One more click will turn off hints.
The Show Status Bar toggles the status bar on and off.
Sets the floating size graph layout.
Sets maximized size graph layout.
Splits Y and Y2 plots.
Inverts Y and Y2 plots.
Hides Y2 plot.
Hides Y plot.
Opens the 2D Graph Scaling or 3D Graph Scaling dialog.
The Reset Default Scaling restores 2D or 3D default scaling
The Common Scaling for Y and Y2 plots sets a common Y,Y2 autoscaling in 2D plots.
The Logarithmic X Axis sets a 2D or 3D Log-X axis
The Logarithmic Y Axis sets a 2D or 3D Log-Y axis
The Logarithmic Z or Y2 Axis sets a 2D Log-Y2 or Log-Z axis or a 3D Log-Z axis.
The Include Inactive Data in Scaling adds the points marked as inactive to the autoscaling.
Sets the 2D View (layout, Y&Y2, states of titles, labels, grids, math errors) or 3D View (size, view angles, mesh, illumination angles, backplanes, perspective, labels, grids, patch plots)
Sets the 2D Point or 3D Point formats.
Sets 2D Custom Titles and 3D Custom Titles. These options also control title and label font sizes.
Font selection for current graph. Graphs are limited to a single font.
Select Color Scheme and Customize Colors.
The Select Color Gradient for Surface or Contour sets the 3D surface color gradient or 2D contour color gradient.
The Overlay Data on Surface or Contour toggles the display of data on or off in 2D contour plots and 3D surface plots.
The Toggle Legend for Surface or Contour displays or hides the gradient legend in 2D contour plots and 3D surface plots.
The Animation settings are set using Modify 3D Animation Settings.
The Start/Stop 3D Animation begins and ends the animation (rotation) of 3D surfaces.
Peak Labels are set using Select Function Labels
Toggles peak anchors on and off. Peak anchors are used for on-screen graphical adjustment of peaks in the AutoFit Peaks options.
Toggles amplitude thresholds on and off. These thresholds are used for accepting and rejecting peaks in the AutoFit Peaks options.
The Show or Hide Legend Titles toggles on and off the data titles legend. One click will replace these to the left, another to the right, and one more will toggle these off.
The Specify Surface Modeling sets the interpolant and smoothing in 3D surface rendering.
The Render 3D Surfaces with Plateau at Upper Z Bound will open and close the upper Z plateau on 3D surfaces.
The Shift Patches to Align Maxima will shift the gradient patches to align maxima. The data is not realigned.
The Hide Rendering of Patch will toggle the display of the gradient patch in patch plots.
Opens Confidence Intervals dialog.
Toggles Confidence/Prediction Intervals on and off.
Display actual residuals.
Display residuals as % of Y.
Display residuals as fraction of SE (standardized).
Display residuals distribution (histogram).
Display delta SNP (stabilized normal probability) plot.